蒸汽压缩蒸馏and vapour compressor Chinese professional manufacturer

蒸汽压缩蒸馏and vapour compressor Chinese professional manufacturer

Other manufacturers around the world produce vertical evaporators, only aqua-chem can produce horizontal production of the hot - press distilled water machine, vertical horizontal the core of the difference is the vertical distilled water produced in the column, and distilled water produced by horizontal evaporator tube side of evaporator, tube side without blind angle in line with GMP requirements, distilled water shell path has more dead zone, not easy to clean. Horizontal evaporator life higher than vertical because thick water does not soak the tube plate, and all vertical evaporators deep water to soak the tube plate.

该蒸发器具有CIP功能，而垂直一个没有，所以清洁是比较复杂的。

The steam generated inside the evaporator passes through the mist eliminator and enters the centrifugal compressor because the steam is continuously pumped.

蒸发表面减压和更容易实现的水蒸发。压缩机出口处，蒸汽压力和温度通，过度压缩的效果提高，并且压缩的蒸汽进入管束，其是更容易冷凝成蒸馏。

The latent heat of water is supplied directly to the evaporator.

The interior of the hot press water machine adopts a mesh type of spacer body, which is like a very winding road and similar multiple fences. Particles in the channel often hit the fence and are blocked, eventually entering the fence even though they're very, very small particles, and they get trapped.

我们集团有几个多效蒸馏水机，具有规格从3吨到5吨

It is analyzed that the equipment for preparing distilled water is changed into a hot press type, and the analysis is as follows:

1.长期运行节能是显而易见的。

Taking 5 ton water machine as an example, the hot pressing type can achieve a steam consumption of 0.3 ton/small with waste heat recovery

，0.6吨/ h的无废热回收，并且1.2吨/与多效小时，节省蒸汽

的75％〜50％的剂量。

If the customer needs to cool the water for injection in the later period, the cooling power of the cooling water can be greatly saved.

消耗的速率，通过热压产生的水可在约75度来控制，大约20度比多效水机降低，不管它是否被多效水机或由水点冷却时，热压的冷却能力被保存。

事实上，蒸汽通过多效水冷却器所消耗的量将被作为小规模的形成的结果的一年后增加或两个使用的，

随着时间和增加的变化，热压蒸馏水机可用于超过20年不考虑热，效率降低的问题。

2.超长寿命的设备。

The hot pressing type is non-pressure vessel equipment, and the multi-effect type is pressure vessel. The life of the hot pressing machine is over 30 years.

多效寿命为8年至10年。从30年的生命周期的角度来看，设备采购成本基本上是相同的。

3.饮水机的水质符合欧盟和FDA的要求

With a 4 Log drop over water, have a third party endotoxin challenge lab report.

案例和优势：

在服务全球VC的直接驱动单元的数。大约100直接驱动VC单元>10吨/小时。

Number of direct drive VC units in Asia。大约25直接驱动VC安装和操作;另外6被制造。

First pharmaceutical company to put direct drive in China at Baxter Guangzhou in 1999.

Designed and introduced direct drive VC technology。AQUA-CHEM是第一家在全球引进技术。

To-date, no design issues or failures with the compressor since the first unit was installed in 1993.

合作与全球领导者（在全球超过300个百蒸汽压缩机），共同设计和制造技术。

标准扩展5年压缩机保修。AQUA-CHEM是世界第一家在1990年推出这个保修因为水色化学直接驱动的可靠性和设计VC是如此的强大，并没有大的失败证明。

This is our标准保修与每个单位，无论客户或位置包括。

Bearing Temperatures and Critical Spare Parts。

压缩机轴承外壳温度过高：40-55C
Motor Bearing Temperatures: 35-55C
压缩机电机和轴承座中放养的Aqua-CHEM /石家庄中国Wiptek店。
Compressor motor service center: Shanghai.

Aqua-Chem vertical tube design in 1950’s and all other VC competitors。

Advanced horizontal tube设计出到今天：高级毒素去除。

WFI在管壳式卫生热交换器是因为最小的裂纹和裂缝对管外部的管的内。

Low & Direct Drive = higher reliability as impeller becomes large。

分离轴承壳体在> 102℃从蒸汽不透过热到轴和电动机的轴承。提高了可靠性，因为它保护马达从热。

Horizontal design eliminates the large mass of water on head gasket, leaks and difficult replacement

AQUA-CHEM喷雾Film®设计
High wetting rates。

Evaporation on outside of tubes。

Evaporator tubes do not remain in blowdown during shutdown mode。

最宽容的技术，不同的给水条件。